Church of Slalom
Repent for you have all sinned. It is time to Turn or Burn.
Luke 13:3b "But unless you repent, you too will all perish."
Church of Slalom
The call has gone out to the faithful and the sinners. Time to get back to church.
First Sunday of the month. Kempt Field. Allawah in Sydney.
Slalom. Longboard. Sliding. Beginners Downhill.
Luke 13:3b "But unless you repent, you too will all perish."
Church of Slalom
The call has gone out to the faithful and the sinners. Time to get back to church.
First Sunday of the month. Kempt Field. Allawah in Sydney.
Slalom. Longboard. Sliding. Beginners Downhill.
Views: 264
Replies to This Discussion
-
Premium MemberPermalink Reply by Lea Robbo on -
point taken!
Pumped for the Station
Mountain Mic..hope you gonna be there. It is your sacred space after all
Robbo said:I wanna see you do the crazy steeep
Lea Robbo said:I wanna see you guys do the craaazy-steep
Bugs said:Sounds good to me too. Pump Station has a bunch of spots for slalom - flat at the top, mellow(ish) in the middle, and steep at the end. Also crazy-steep on the other side.
-
Permalink Reply by Guff on
-
so pumpstation 8am sunday? fast hybrid starting about 50 metres down from where the gs starts?
-
ASRA AdminPermalink Reply by Bugs on -
Guff said:so pumpstation 8am sunday? fast hybrid starting about 50 metres down from where the gs starts?
8am? You're insane.
-
Premium MemberPermalink Reply by Fitz on -
How about 10am?
It takes me 1hr15min to drive there.
Guff said:so pumpstation 8am sunday? fast hybrid starting about 50 metres down from where the gs starts?
-
-
How about 9am it is just that it gets so hot up there come 12oclock it is farkin hot and you are only just gettin warmed up.....
-
Permalink Reply by Bozac on
-
yeah i can do 9 am if fitz is keen. i will give you the cash for the board there as well guff
-
Premium MemberPermalink Reply by Marek on -
So that's 9am for the keen. 10 for the slackers or geographically challanged. Sounds good. But i'm currently about a 50 percent chance of getting there.
-
-
hey guys i got an airflow truck for xmas and was just wondering if the light axle rust will be an issue due to the axles being 8mm. i know i live on the coast but im a bit worried about how quick they oxidised. is there any coating i can put on them fitz?
-
ASRA AdminPermalink Reply by Bugs on -
Bozac said:hey guys i got an airflow truck for xmas and was just wondering if the light axle rust will be an issue due to the axles being 8mm. i know i live on the coast but im a bit worried about how quick they oxidised. is there any coating i can put on them fitz?
Very light sandpaper should clear the rust. A bit of light oil should help prevent rust (and help get the bearings off/on).
Cool weather tomorrow, so a super-early start is not only unlikely (for me) but unnecessary.
-
Premium MemberPermalink Reply by Lea Robbo on -
yes I agree bugs...i be there more like 11am unless Dave drags me up sooner
© 2025 Created by Bugs.
Powered by
