ASRA - Australian Skateboard Racing Association

Deeks63's Discussions (122)

Discussions Replied To (93) Replies Latest Activity

"Close... just measured mine and they're 400mm - the base board and rail is 1220mm. S…"

Deeks63 replied Jan 6, 2012 to How To Begin Making Boards

27 Jan 16, 2012
Reply by Logan O'Brien

"Good point...  I cut out both planks before gluing and pressing exactly for the reas…"

Deeks63 replied Jan 6, 2012 to How To Begin Making Boards

27 Jan 16, 2012
Reply by Logan O'Brien

"Not a problem and good luck.  Happy to answer any question if I can!"

Deeks63 replied Jan 6, 2012 to How To Begin Making Boards

27 Jan 16, 2012
Reply by Logan O'Brien

"pretty much... You can hand-drill the holes, but take some care as the whole things…"

Deeks63 replied Jan 6, 2012 to How To Begin Making Boards

27 Jan 16, 2012
Reply by Logan O'Brien

"yep - Bunnings for this lot (in the pictures - see my profile). I made the rail out…"

Deeks63 replied Jan 6, 2012 to How To Begin Making Boards

27 Jan 16, 2012
Reply by Logan O'Brien

"the "rail" runs the length of the press and is compressed down by the cross beams of…"

Deeks63 replied Jan 6, 2012 to How To Begin Making Boards

27 Jan 16, 2012
Reply by Logan O'Brien

"12mm thick - yep. I have some pictures on my profile of some of the decks ive had a…"

Deeks63 replied Jan 5, 2012 to How To Begin Making Boards

27 Jan 16, 2012
Reply by Logan O'Brien

"For sure Alex... I'm not a great fan of Bunnings in my area (SE Suburbs of Melbourne…"

Deeks63 replied Jan 5, 2012 to How To Begin Making Boards

27 Jan 16, 2012
Reply by Logan O'Brien

"Last set of decks I made with 6mm marine ply I got a 2400x1200 sheet for about $85 a…"

Deeks63 replied Jan 5, 2012 to How To Begin Making Boards

27 Jan 16, 2012
Reply by Logan O'Brien

"I have found that hoop pine ply is very good albeit a little soft, but if you use a…"

Deeks63 replied Jan 5, 2012 to How To Begin Making Boards

27 Jan 16, 2012
Reply by Logan O'Brien

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service