ASRA - Australian Skateboard Racing Association

Stripped bolt

Ive like messed up the screws on my board (dont have a clue how), but now i cant loosen the nut to switch the trucks.

Its hard to explain, but how can i get them off? they are too tight, and the skate tool little thing cant actually lock into the star of the screw. Any ideas?

Sounds really grommy, but yer help me out.

Views: 260

▶ Reply to This

Replies to This Discussion


Premium MemberPermalink Reply by Tom Radinski on July 18, 2011 at 16:18
Drill into the top of the screw, the head of the screw will pop off.
Permalink Reply by Jordannn on July 18, 2011 at 16:20
Wont that mess up the actual holes in the deck though?

Premium MemberPermalink Reply by Tom Radinski on July 18, 2011 at 16:25
If you fck up, and drill into the wood then yes. One way to avoid that is 'don't fck up and drill into wood'. Use a fine drill bit and keep increasing the size untill the head pops off.
Permalink Reply by Jordannn on July 18, 2011 at 16:28
So just drill into the star thing?
Permalink Reply by Alexander on July 18, 2011 at 16:32
or go to a work shop and find a rattle gun that are used on car nuts i guarrentee that screw will disappear as soon as you pull the trigger   
Permalink Reply by Jordannn on July 18, 2011 at 16:34

Haha, not really to keen to spend money on something as small as this aye.

 

Permalink Reply by Alexander on July 18, 2011 at 16:35
fair enough....come to think of it it would probably disintergrate yer board  

Premium MemberPermalink Reply by Tom Radinski on July 18, 2011 at 16:40
Yeah mate just drill into the star thing.
Permalink Reply by Jordannn on July 18, 2011 at 16:42
Righto.

Tom Radinski said:
Yeah mate just drill into the star thing.

Premium MemberPermalink Reply by Jake Elliott on July 18, 2011 at 17:18
if you can get your hands on visegrips (locking pliers) and lock them on to the head of the screw, it might be safer to try that first
Permalink Reply by Jordannn on July 18, 2011 at 17:27
What do you mean? And just try to pull it out with the pliers?

Premium MemberPermalink Reply by Jake Elliott on July 18, 2011 at 17:43
nah just lock it onto the head of the screw to hold it then use a spanner or skate tool to undo the nut on the bottom

▶ Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service