ASRA - Australian Skateboard Racing Association

i was talking to my friend about lathing wheels one day, and he told me that urethane dust causes cancer. is this true?

Views: 877

Reply to This

Replies to This Discussion

from what I have read, proper urethane is very carcinogenic, and the polyurethane in skate wheels is not as bad. but for that matter, any dust / particulate matter that you breathe in is carcinogenic. 

 

after recent chats with my boss I can not forsee myself taking lathing of wheels up again, so here are some tips.

 

due to the unsupported shape of a wheel, and the resilient nature of the thanes, the most effective way that I found to machine wheels down was to actually use emery to cut it. 

 

I would wrap a piece of 40Grit emery around a piece of keysteel, with the key steel bolted into the lathes toolpost just use it like a regular lathe tool.  

 

spindle speed any where between 1000 and 1200 RPM 

 

 

the real key is how you mount the wheels on the lathe, if you dont mount them correctly you will never end up with a wheel that doesnt vibrate the shit out of your board. 

 

I mounted my wheels on a mandrel that had a shoulder turned to the same size as a bearing, to me this is the most logical surface of the wheel to secure it against.

if you pay me 20 bucks

Connor Ferguson said:
yo billy you want to lathe my grippins?
how about you pay me 40 and keep them ahhaha
elliot sheilds does for 10 ?

Billy Bott said:
if you pay me 20 bucks

Connor Ferguson said:
yo billy you want to lathe my grippins?
I don't reckon it's stupid the kid just sounds concerned about his health and safety... Isn't this the attitude we are trying to instil in the groms, to be safety conscious? 

Tim Day said:
Yet another freakin stupid asra thread
i can see where tims coming from, like billy could of googled it instead of making a thread but in saying that billy is right for posting it on here for his safety and others safety
i did google it, and nothing much came up

Connor Ferguson said:
i can see where tims coming from, like billy could of googled it instead of making a thread but in saying that billy is right for posting it on here for his safety and others safety
exactly my point 

Connor Ferguson said:

Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service