Premium Member
Board Builders
Information
for any one who has made/modified a board. post some pics of your press or completed boards, its all good. also, maybe share some tips on building and where to get supplies also, occasionally, we can have a build off from time to time...
Members: 226
Latest Activity: Jun 8, 2016
this is matthys intense build, if you can beat this, you get your photos here!!!
Discussion Forum
bolt holes 8 Replies
hey guys, was just wondering, how do u guys drill/mark out ur bolt holes for ur trucks??if uve made a jig post a pic if u want, ive read through the thread and came across this, it seems pretty good,…Click here for the full story
Started by dean cunningham. Last reply by Adam Nov 14, 2013.
For Sale: Double Kick Press Forms 4 Replies
These are industrial strength super heavy duty forms made from railway sleepers.You will need a press to create your decks with these forms.They are total surface contact forms, not just edge bending…Click here for the full story
Started by Fitz. Last reply by Fitz Aug 23, 2013.
Love all your work guys!
Hey crew.Just a quick note to say big props! We are a small team here at Prince Albert, and have gone through a lot of R&D to teach ourselves how to make boards to a marketable quality. All the…Click here for the full story
Started by Bryan Sainsbury-Hore Jul 10, 2013.
Concave 6 Replies
Whats some cheap easy ways I can put a concave on some ply .Click here for the full story
Started by charliefisher. Last reply by Deeks63 Jun 6, 2013.
Comment Wall
Add a Comment
-
Comment by A Dalrymple on December 16, 2013 at 13:24
-
@Ben Rainford and Toby Hampson
Cost wise the best solution I have found is thin sheets of ply, from a local supplier I can get 1.5mm thick BC sheets of hoop pine ply (which in reality has pretty much AA quality faces) for about ~$70 for a sheet and it's surprising how much shape and curve you can get from this ply. If the curves in your deck are less radical you can also get 3mm or 4mm BC hoop pine ply sheets for ~$40 a sheet. Personally I prefer the exterior or structural grades as the glue line will last longer.
Interestingly you can make decks out of any timber species, even solid (eg. not made from veneers), it just takes a little more research and design effort. If your interested in what is possible check out this board, it is a flat deck but it is solid timber, flexible, thinner and lighter than most decks; D&F Boards - Bendy Flexy I helped out with the design on this deck and I have to say that the ride is sick!
If anyone is after help with the calcs, etc for a non-standard deck then hit me up I'd be happy to help!
-
Comment by Beuner HE (Bamboo veneer) on December 16, 2013 at 12:28
-
Why not try bamboo veneer? We supply directly from China.
It is cost effectively and elegant. Also, bamboo decks are stronger than wood.
-
-
Does anyone know any wood veneer suppliers in SA?
Looking for, hoop pine or baltic birch and im open to any other cheaper wood suggestions.
-
-
anyone know what to use as cheap wood for my second build, don't want to spend to much?
-
-
nice work adam, they look sweet, how do you apply on the graphic?
-
Premium Member Comment by Adam on November 14, 2013 at 13:48 -
-
Premium Member Comment by Adam on October 17, 2013 at 17:22 -
-
Comment by Adam Babic on October 12, 2013 at 15:26
-
This pic is crap but heres my second build!
9 ply maple
38.25" long
28" wheelbase
10" wide at front 9" wide at backsetup: ronins 40/40 and rad advantage 78a
-
Comment by Mark Gorman on October 8, 2013 at 18:10
-
Well done with the wheel flare , have seen this done as part of the concave foot well area, of some Five mile proto and some IDF spec buttboards looks great got any pics of the mold area for the front
-
-
Woops wrong picture. Here's the full deck.
33.75" long
24" and 25" wheelbases
7 ply maple, 4 glass
© 2024 Created by Bugs.
Powered by
You need to be a member of Board Builders to add comments!