ASRA - Australian Skateboard Racing Association

Seems theres a bit of interest in these so if you want one for your board i can make one. Just need a template of the nose section (paper, wood) It is better to have the deck to get it perfect.

 

OK HERES HOW IT WORKS, You send me a paper template, Youll need a peice about 200 x 200. Take the front truck off your board and place paper, or perefably light carboard under the nose and past the truck holes. Trace it, Truck cutout and holes, and make sure its correct cause i will use that as the actuall template by glueing it to my Alum base plate (then i will weld the actuall guard to that) I will also need to know the thickness of your deck, most important..

It is better if i can get your deck or the actuall model deck to make it with, so for those in the Shire im in Caringbah, you can drop it off.

Post the template to: 

Colin Olive  

623 Port Hacking rd  

Caringbah

NSW, 2229

 

Give me a buzz and tell me its on its way 0418672600.... Price $25....ill post for free.


Views: 4856

Reply to This

Replies to This Discussion

got a template so can make them when you want...
Hey Col do you have a templte for an earthwing belly racer? Mine just came in today

Any Topmount rayne killswitches?

Nose and Tail?

hey col when you say laser cut ones are in the works are they still alum or are they going to be a stronger steel?
I can make them out of steel but they would have 2 be powdercoated so they dont rust. Canned the lazer cutting as were setting up a plazma at work but is a bit in the future yet.

Bozac said:
hey col when you say laser cut ones are in the works are they still alum or are they going to be a stronger steel?
Hey Col my earthwing has 2 sets of truck holes will your new slotted design account for both?
Hey Col just to check before I send them. You said you wanted 200 by 200 was that a necessity? Does it matter that the cardboard edges are shonky? (belly racer btw)
There fine mate ,,good job

Cents said:
Hey Col just to check before I send them. You said you wanted 200 by 200 was that a necessity? Does it matter that the cardboard edges are shonky? (belly racer btw)

send a template ill make it work
Cents said:
Hey Col my earthwing has 2 sets of truck holes will your new slotted design account for both?
Templates sent today, Cheers
HEY do u have rayne nemesis  templates???
Did you end up getting my templates?

Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service