campbell macmahon's Page

bro the thing with topmounts without cutouts are that they are always a compromise,

you will undoubtadly get static wheelbite with almost every truck, save smokies..

but the thing is, as long as you dont try to do a quick u-turn or pump at 5kph, youll be fine

when you set up a  board like that, you have to consider that you are probably going to get wheelbite when you goof around under 20kph

have you tried putting Cup washers in? they help to restrict lean

you will notice that on almost all of the pros like jacko, benbro, james kelly, krimes, loui, gmack, all their setups will easily get wheelbite... you just have to learn where the limit of your turn is when your riding slow, its something you have to do if you want to get all the sick benefits of foot placement..

umm i was thinking about possibly showing, but it's still a maybe.... if your going bro it will increase those chances

no worries mate. Skate safe...

Hey mate I am a normal pusher and footbreaker. I just like to mongo Break and push. I think mongo breaking looks rad . I have a mate that taught himself to foot break normal because he thought it was to scary to mongo break. He can do it sweet not.
You should try to change to normal break. The best way I find to do things like this is to get on my slalom or a small board and bust it up it the streets and footpaths. Try pushing up some speed then jam on the breaks. You can build up your speed as you get better. Good luck...

sup campbell, i actually just went into my local car tint shop, and asked if he would do it for 5 bucks, he just got the apprentice to do it. If you do get it done, let it dry for atleast a week, and run a hair dryer of it to make sure its completely stuck on, i used mine that day cause i was doing some DH, its got air bubbles in it now, would of been easy to avoid that, also got the poly carb from bunnings for like 5 bucks, hope that helps bro

skate hard

hi mate, when you told me about the board i pictured more of a delam than what has actually happened ,its not the laminations that have failed its the bamboo that has shattered and i reckon its travelled a long way through the board through multiple layers, obviously from a pretty big impact like the drop off windmills, i'll try stretch it out to open it more to try and get some resin deep in it but that may just snap the whole back off it as i'll have to break it more in my press to open it up, so i can try but i reckon its pretty terminal, let us know what you want me to do, if you want to keep it intact to hang on the wall i'm best not to try open it up more, the other prob is that my resins may not bond well to the pva that is already in the cracks, if you had used a poly resin it would definatly not bond, give me a call, 0421761171

print systems , unit c 172 evans road salisbury, i'm there from 4am till 2 pm , she will need to call me on 0421761171 to let me know she is there

get it back to me for a few days and i'll sort it out ,0421761171

no worries mate, glad you like it, its probably the last one off graphic to be sold, and there will be very few if any available for a few months at least, hope you thanked your mum.Pete.