sorry man going to the mates now didnt have time, but i told my parents and stuff and there cool with it so ill send the pics and invoce tomorow arvo and once the money comes through ill hopefully have it shipped monday morning.
hey man for some reason market place ins't letting me send messages, i was trying to reply to your WTB cruiser/carving deck....
im selling my comet voodoo doll for $155 (including hardware) its 36", it can be set up for cruising and carving with the right trucks and bushings of course. i live in sydney as well, i've got an advert in the market place if you want to check it out for pictures. its literally brand new as you will see by the pics..... its a top-mount board as you would know so its better for carving cause the turning angle on top-mounts its greater than drop-decks. up to you =)
ahk no worries...yeh i tried to reply to you through email but its not working, it just says its sending the email but its in a frozen state....so comment was the next best option
Hey dude,
You don't have to worry too much about the front and rear being the same width.
I ended up getting all three sizes of Bennett to try them out. I use the 5 far more than the others for ldp. It can still get you up most hills (that you would actually bother trying to pump up) and maintain a decent speed with a nice rhythm on the flat. The 4.3 is great for getting up hills and stationary starts though.
Maybe see if you can get one of each. It's easy to switch the hangers over since you don't have to change the baseplate.
there are some images on my homepage. They're 210 wide hangers with interchangeable Radikal axles. You could make them 205 (minimum) if you bought some 1/4" Radikal axles. Or up to 250 if you bought bigger axles.
They have rounded edges all round and highly polished. They also have a remachined bushing seat to accept eliminator style, stepped bushes.
Milled down? That sounds drastic. I have access to a mill so why don't I come over, talk trucks have a skate and see what you want to sell. where in sydney are you?
You shouldn't have to wedge your randal so much. The whole reason I go with randal geometry hangers is so you can swap to one of the many different angled baseplates.
They even make a 28* plate.
If you get realy stuck I can sell you a foam double wedge riser. Its thinner than using 2 wedges together. That way you won't require crazy long bolts.
Tom Buckley
Mar 5, 2011
Tom Buckley
Mar 5, 2011
Dylan Reid
hey man for some reason market place ins't letting me send messages, i was trying to reply to your WTB cruiser/carving deck....
im selling my comet voodoo doll for $155 (including hardware) its 36", it can be set up for cruising and carving with the right trucks and bushings of course. i live in sydney as well, i've got an advert in the market place if you want to check it out for pictures. its literally brand new as you will see by the pics..... its a top-mount board as you would know so its better for carving cause the turning angle on top-mounts its greater than drop-decks. up to you =)
Apr 30, 2011
Dylan Reid
Apr 30, 2011
Premium Member
James
You don't have to worry too much about the front and rear being the same width.
I ended up getting all three sizes of Bennett to try them out. I use the 5 far more than the others for ldp. It can still get you up most hills (that you would actually bother trying to pump up) and maintain a decent speed with a nice rhythm on the flat. The 4.3 is great for getting up hills and stationary starts though.
Maybe see if you can get one of each. It's easy to switch the hangers over since you don't have to change the baseplate.
Jun 19, 2011
matt lloyd
Aug 7, 2011
matt lloyd
Aug 7, 2011
Premium Member
Fitz
there are some images on my homepage. They're 210 wide hangers with interchangeable Radikal axles. You could make them 205 (minimum) if you bought some 1/4" Radikal axles. Or up to 250 if you bought bigger axles.
They have rounded edges all round and highly polished. They also have a remachined bushing seat to accept eliminator style, stepped bushes.
Baseplates are unchanged.
Oct 9, 2011
mack daddies daddie
hey bro munkaues are gone so are purp inheats
can make glyde complete with paris and new oj in heats for 300 .......this glye is worth $220
Oct 9, 2011
mack daddies daddie
truck i dunno i just got it never skated it never really looked at it
Oct 9, 2011
Premium Member
Fitz
210 suit me because I have an 11" wide board and massive feet.
I can machine them down smaller but need payment upfront.
Oct 9, 2011
Josh Monk
Cheers cents, That sounds rad. Thanks
Nov 7, 2011
Premium Member
Adam
i can pretty much do all of that but not the rocker, i do a 9mm drop at one end which ends up like a rocker under the front foot.
Nov 9, 2011
Will Smith
hey im looking to trade or sell my supermodel so let me know if your keen. its up in the marketplace
Nov 10, 2011
Will Smith
made a new ad. im looking for above $100, so like $110ish? or a trade for belly racer if youve got one. and nah sorry i just sold my indys
Nov 10, 2011
Premium Member
Ben Mod
Dec 26, 2011
Premium Member
Ben Mod
Dec 27, 2011
Premium Member
Ben Mod
Milled down? That sounds drastic. I have access to a mill so why don't I come over, talk trucks have a skate and see what you want to sell. where in sydney are you?
Dec 27, 2011
Gus Dawson
Hey, I'm interested in the Wolfshark, whereabouts in Sydney do you live? I could perhaps pick it up to save on shipping
Jan 27, 2012
Gus Dawson
Aargh, Randwick, that's a bit of a trek, wouldn't be able to get out there for a while. Yeah, the nose guard looks good too
Jan 28, 2012
Gus Dawson
Hey sorry man, I picked up a new deck at the Hopkin shindig today. Good luck with the wolfshark though!
Jan 28, 2012
Premium Member
Fitz
22" axle to axle.
You shouldn't have to wedge your randal so much. The whole reason I go with randal geometry hangers is so you can swap to one of the many different angled baseplates.
They even make a 28* plate.
If you get realy stuck I can sell you a foam double wedge riser. Its thinner than using 2 wedges together. That way you won't require crazy long bolts.
Feb 6, 2012
Premium Member
Fitz
They're 15* which is usually the angle most kicktails are. This will level out your rear truck so you can use just a 35* Randal plate and hard bushes.
Just 4mm thick at the sharp end.
6gms and super high density foam.
$7 shipped.
Feb 6, 2012
Premium Member
Matthys
dude, you willing to ship the 4prez up to brisbane?
Feb 21, 2012
Premium Member
Jack Glenn
hey mate, sorry there not available anymore, i know fitz had a fresh set to sell a couple of weeks back, hit him up.
Apr 5, 2012