just a note, sam humphery may be taking over the organing of the event from now on, i have had some rather large family issues pop up and i dont think i will be able to commit enough time to the contest for it to work properly
yeah, i think it might turn into a house warming for oscar cos they havnt checked out his place yet and he hasnt checked out his new local hills which happen to be quite dope
NEWSFLASH
13th of march is the date we are most likely going to go for
Fitzroy gardens for the racing
Hemleys for the pre race entertainment and drinks kicking off at 3pm
two divisions for those under 18 and over 18, groms can race both groups and the two divisions are going to be on different tracks something that is more straight and less turny and fast for the groms, the hardest line i can find in the gardens for open devision.
hahahahahahah dom, it went alright i actuually went skating straight after i got out of hospital, even tho i concussed myself i still wanted to skate. you shoulda come out man it was justa chill sessss. btw come out this saturday? sean and i think ching and shit are gonna be there.
hey alex well saturday usaully is it, but also sunday with hemleyss
saturday is ur best bet
heres my number 0417001943, its in the city we meet about 1 at fed square give me a txt tonight and ill have it worked out for ya
aw man was really hoping to ride your early board this saturday! yeah the cruise to st kilda is pretty mush a push-fest from what i heard from fendy and g. bring loads of water. unless you find a hill somewhere around there dont think we'll be doing any sliding on the way. could always stop by fitzy for a while
IF THERE IS DISTANCE I AM NOT GOING TO SHOW, I AM UNFIT AS FUCK AND THERE IS NO WAY I AM WASTING MY TIME PUSHING A TOP MOUNT OR MY FREERIDE BOARD THAT FAR (oppinion may chance if my 'friend' can get the day off work who lives in Stkilda in which case i might have to come
and jason your racing groms atleast bra, its a piss easy run that you will be racing, its a straight, a left turn then a straight and then a finish line, open will be a nice straight into a hard left into a hard right then straight into a right sweeper before turning directly into a left
friday late arvo me ben and oscar are goign shredding of the gnar and allyway spots on newmarket (few nice little spots to slash some standies on driveways and just fucking slipperly surface)
dude if simon didnt have my distance board i would think about it, but no fucking way i am pushing that far on my omni, also ben is gonna be down so we should shred some gnar with him instead of pushing some distance, i wanna go bomb fitzy with a pack of guys
QUESTION sean. quEstion. last time we planned a skate to st kilda sean had some bullcrap about how he'll go with his friend but if we see them to pretend like we dont know him and that we didnt plan a skate trip or something like that.
which ben sean? asian? canadian? i'll see what i got going on friday but i'll definitely be free to catch up with oscar and gang at night.
girl ey ben;)
ben you an ching can have goes each riding my board so you dont have to slug ur omni if you come ill ride one of u two boards or whateves:D but i guess sean if you dont wanna ride so st kilda with us then fine fine:) ching and i will with who ever else wants to join:D
*sean, wtf at my apple mac doing like full type words for me,
i wrote sean it like wrote ben, i wrote to my friend one facebook asking to see how much she has with her tommorw and seriously it said this "will you have sexy with you tommorw" like wtf:S
I think if the foam got about 5mm thicker as it went into the middle it will make it stronger becuase you are increasing the bending radius of the shell, which is the fiber-glass/carbon. So the front and back foam thickness will be 1cm and as it goes into the middle it will increase by about 1.5 to 1.8 cm's. Which should make a big difference.
Does the 313 Invader and WeFunk SpeedBone have more thickness to the middle???
Dale
Feb 22, 2010
Premium Member
Fendy
Feb 23, 2010
Premium Member
sean meaney
Feb 23, 2010
jason treloar
Feb 23, 2010
Premium Member
sean meaney
Feb 23, 2010
jason treloar
Feb 23, 2010
Premium Member
sean meaney
Feb 23, 2010
Oscar
Feb 23, 2010
Oscar
Feb 23, 2010
Premium Member
sean meaney
Feb 23, 2010
Premium Member
sean meaney
13th of march is the date we are most likely going to go for
Fitzroy gardens for the racing
Hemleys for the pre race entertainment and drinks kicking off at 3pm
two divisions for those under 18 and over 18, groms can race both groups and the two divisions are going to be on different tracks something that is more straight and less turny and fast for the groms, the hardest line i can find in the gardens for open devision.
PEACE
Feb 24, 2010
jason treloar
Feb 24, 2010
jason treloar
Feb 24, 2010
Alex Roslaniec
Feb 24, 2010
jason treloar
saturday is ur best bet
heres my number 0417001943, its in the city we meet about 1 at fed square give me a txt tonight and ill have it worked out for ya
Feb 24, 2010
Alex Roslaniec
Feb 24, 2010
Alex Roslaniec
Feb 24, 2010
jason treloar
Feb 24, 2010
Alex Roslaniec
Feb 24, 2010
jason treloar
Feb 24, 2010
Alex Roslaniec
Feb 24, 2010
jason treloar
Feb 24, 2010
Alex Roslaniec
Feb 24, 2010
jason treloar
Feb 24, 2010
Alex Roslaniec
Feb 24, 2010
jason treloar
Feb 24, 2010
Alex Roslaniec
Feb 24, 2010
jason treloar
Feb 24, 2010
Alex Roslaniec
Feb 24, 2010
Premium Member
Ching
Feb 24, 2010
Alex Roslaniec
Feb 24, 2010
Premium Member
sean meaney
Feb 24, 2010
Premium Member
sean meaney
Feb 24, 2010
Premium Member
Ching
Feb 24, 2010
Premium Member
sean meaney
friday late arvo me ben and oscar are goign shredding of the gnar and allyway spots on newmarket (few nice little spots to slash some standies on driveways and just fucking slipperly surface)
Feb 24, 2010
JeSSSe

What do you gyz think of the design, its exacly like WeFunk exept the shape is abit didfferent.Feb 24, 2010
JeSSSe
But im still unsure what veneer to use and where to get it.
Feb 24, 2010
jason treloar
i want one.
Feb 24, 2010
JeSSSe
Feb 24, 2010
jason treloar
Feb 24, 2010
jason treloar
Feb 24, 2010
Premium Member
sean meaney
Feb 24, 2010
jason treloar
Feb 24, 2010
Premium Member
sean meaney
Feb 24, 2010
Premium Member
Ching
which ben sean? asian? canadian? i'll see what i got going on friday but i'll definitely be free to catch up with oscar and gang at night.
also, sunday night sessions again!
Feb 24, 2010
Premium Member
sean meaney
Feb 24, 2010
Premium Member
sean meaney
Feb 24, 2010
jason treloar
ben you an ching can have goes each riding my board so you dont have to slug ur omni if you come ill ride one of u two boards or whateves:D but i guess sean if you dont wanna ride so st kilda with us then fine fine:) ching and i will with who ever else wants to join:D
Feb 24, 2010
jason treloar
i wrote sean it like wrote ben, i wrote to my friend one facebook asking to see how much she has with her tommorw and seriously it said this "will you have sexy with you tommorw" like wtf:S
Feb 24, 2010
JeSSSe
I think if the foam got about 5mm thicker as it went into the middle it will make it stronger becuase you are increasing the bending radius of the shell, which is the fiber-glass/carbon. So the front and back foam thickness will be 1cm and as it goes into the middle it will increase by about 1.5 to 1.8 cm's. Which should make a big difference.
Does the 313 Invader and WeFunk SpeedBone have more thickness to the middle???
Feb 24, 2010